Ikegami HC-HD300 Operation Manual page 103

Menu Item
LENS SELECT
― NUMBER
― NAME
― (
)
― EXTENDER
― AUTO SEL
― FILE SET
― LENS TYPE
― AUTO x0.8 CONV
― X0.8 CONV CONT
LENS SERIAL I/F
LEVEL ADJUST
― MASTER GAMMA
― MASTER PED
― MASTER FLARE
― DTL GAIN
ADJ CLR
PROCESS MODE
― SMOOTH STEP GAIN
― SMOOTH STEP ECC
― MATRIX
― ADVANCED MATRIX
― HI-LIGHT DTL
― GAIN
LIMIT
Initial
Setting Value
Setting
OFF NO.1 to NO.8, OFF
(---------) 12 characters
AUTO SEL name display
(---------)
section
ON-1, ON-2, ON-3,
OFF
x0.8 CONV, OFF
OFF ON, OFF
OFF MANUAL, AUTO, OFF
C.PORTABLE, C.STUDIO,
C.FIELD, F.PORTABLE,
OFF
F.STUDIO, F.FIELD,
OFF
OFF ON, OFF
OFF ON, OFF
ON ON, OFF
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
READY,
READY PUSH SET→CLR,
CANCEL
ON-0.3s, ON-0.5s,
ON-0.7s, ON-1.0s,
ON-0.5s
ON-1.5s, ON-2.0s,
OFF
ON-0.3s, ON-0.5s,
ON-0.7s, ON-1.0s,
ON-0.5s
ON-1.5s, ON-2.0s,
OFF
OFF 1, 2, 3, OFF
OFF ON, OFF
ON ON, OFF
0.0 0 to 100
0.0 -100 to +100
HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
Description, Remarks
Select the lens file number.
-If the lens code is obtained from the lens, (CODE SEL) is
displayed on the back of the lens number display.
-If AUTO SEL is ON, "AUTO SEL" is displayed on the back
of the lens number display.
Set the file name for each lens file.
Attaching the lens model name, etc. will make it easier to
know the correspondence between the lens number and lens.
Displays the lens name obtained from the serial lens.
Displays the extender state.
The lens file number is switched automatically according to
the model name obtained from the lens.
See "5.2 Settings from the Menu [FILE SET]" (P94) for
the FILE SET usage method.
To match the zoom tracking DTL operation characteristics
with the lens zoom characteristics, set the time of the lens
used in the camera.
C.PORTABLE : Canon portable lens
C.STUDIO : Canon studio lens
C.FIELD : Canon field lens
F.PORTABLE : Fujinon portable lens
F.STUDIO : Fujinon studio lens
F.FIELD : Fujinon field lens
OFF : Game tracking DTL is OFF.
Set by lens file (NO.1-8).
Set automatic switching of the aspect ratio converter (X0.8)
internal lens.
If set to ON, it operates in linked motion with the output
aspect ratio of the down converter to carry out automatic
switching.
If turned ON when using the X0.8 converter internal lens,
control is possible.
When not using the X0.8 converter internal lens, set to OFF.
Set whether to respond to the serial interface of the lens or not.
Sets the master gamma value.
The gamma value decreases in the direction of " -100" and
increases in the direction of "+100".
Sets the master pedestal value.
The pedestal value decreases in the direction of "-100" and
increases in the direction of "+100".
Sets the master flare value.
The flare value decreases in the direction of "-100" and
increases in the direction of "+100".
Sets the detail amount.
The detail amount decreases in the direction of "-100" and
increases in the direction of "+100".
Returns the settings changed with LEVEL ADJUST to the
state prior to change as a group.
Changes the STEP GAIN step by step.
Possible to choose the time until convergence.
Changes the STEP ECC step by step.
Possible to choose the time until convergence.
There are independent settings for three channels of the
matrix, which can be switched.
Sets the ON/OFF of advanced matrix.
Possible to increase the DTL level of the highlight part.
Sets the level value to be emphasized.
Level increases in the direction of +100.
Sets the upper limit for the emphasized DTD level.
The "-100" direction lowers the limit. The "+100" direction
raises the limit and lowers the DTL level.
MENU DATA
ALL VF
○ ×
- -
- -
× ×
○ ×
× ×
○ ×
5
○ ×
○ ×
○ ×
× ×
× ×
× ×
× ×
- -
○ ×
○ ×
× ×
× ×
× ×
× ×
× ×
87