Ikegami HC-HD300 Operation Manual page 126

6.3 Initializing the Settings of this Product
5
Turn the rotary pulse switch to select the set value,
and press the SET button.
The value is confirmed.
- Selecting "CANCEL" cancels the setting and
terminates "PRESET FILE LOAD".
- Selecting "START" displays "PUSH SET -> START"
at the bottom of the screen.
Go to Step 6 when selecting "START".
6
Press the SET button.
Initialization starts.
When the file load is completed, "COMPLETED"
appears on the screen. Then, "CAMERA RESTART"
blinks for about three seconds. After that, the camera
restarts and the initialization is completed with the file
selected in "FILE SELECT".
110 HC-HD300 1412 VER1 (U)
Select the set value and
confirm.
- Selecting "START"
displays a message at
the bottom of the
screen.
"COMPLETED" is
displayed at the bottom
of the screen.
"CAMERA RESTART"
is displayed at the
bottom of the screen.