Enhancing The Vertical Resolution (Super-V Function) - Ikegami HC-HD300 Operation Manual

5.1 Settings Using Switches on the Camera

Enhancing the Vertical Resolution (Super-V Function)

Super-V function enhances the vertical resolution. It is activated from the camera, MCP, or OCP.
Note:
- The sensitivity of the camera decreases when in the Super-V function mode.
- When a remote controller is connected, the operation of the remote controller has priority over the operation switches on the camera.
1
Select "1" or "2" from MENU (1/4) "VF DISPLAY" - "DISPLAY MODE."
Characters appear in the viewfinder.
Reference:
Refer to "5.2 Settings from the Menu [Menu Configuration and content]" (P81) for details.
2
Set the SHUTT/SUP-V switch on the right side of the camera to SET.
One of the following modes is displayed:
- Preset shutter speed
- Variable shutter speed
- SUPER-V
Note:
Each time the SHUTT/SUP-V switch is pressed to the SET position, the mode switches are in the order of preset shutter,
variable shutter and SUPER-V.
3
Select "SUPER-V."
Note:
The flashing stops automatically in approximately 3 seconds after the setting operation ends.
4
Press the SET button.
■ To Cancel the Super-V Function
1
Set the SHUTT/SUP-V switch to OFF.
74
Camera front view
Rotary pulse switch
HC-HD300 1412 VER1 (U)
Camera right view
(Switch control panel)
SHUTT/SUP-V switch