Ikegami HC-HD300 Operation Manual page 99

Menu Item
SW FUNCTION
― RET-1 (HANDLE)
― RET-2 (HANDLE)
― ZOOM SPEED
FOCUS SPEED
INFORMATION
― MPU MODULE SW
― WORKING TIME
― SUB TIME
VERSION
― MPU ROM
― D.PROC (PRE)
― D.PROC (POST)
― DRIVE PULSE
― MPU
SDI-TRX
*1 : It is possible to determine when loading MENU DATA from the SD CARD whether to read the entire MENU or to read only items related to VF.
" ○ , × " indicates the contents to be read at that time.
*2 : If the color VF is recognized automatically, the display switches to R/G/B.
Initial
Setting value
setting
RET-1, ZOOM-,
RET-1
FOCUS-, NONE
RET-2, ZOOM+, FOCUS+,
RET-2
NONE
15 0 to 100
15 0 to 100
--- MPU substrate DIP SW
****.*H (information
---
display)
****.*H (information
---
display), RESET
STRB6001V**.**.**
---
(information display)
--- (information display)
---
---
---
(information display)
---
---
HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
Description, Remarks
Sets the button control of RET-1 and RET-2/MIC on the top
of the handle.
When assigning to ZOOM, FOCUS, a serial lens is required.
Sets the operational speed of ZOOM, FOCUS control. The
speed is slower for "0" and faster for "100".
Displays the DIP switch settings of the MPU module.
Displays the total accumulated operation time of the camera
up to the present.
Displays the camera's calculated operation time.
Differs from WORKING TIME because it can be reset by
the user.
Number to control the structure of the camera software and
FPGA.
(Regarding the SDI-TRX, because it is on the FA side, it is
not included in this control number).
Displays the camera software version.
Displays the FPGA version.
MENU DATA
ALL VF
○ ×
○ ×
○ ×
○ ×
- -
- -
- -
- -
- -
5
- -
83