Ikegami HC-HD300 Operation Manual page 70

3.5 BS Connection
■ Removing the Fiber Cable
This section explains how to remove the fiber cable.
CAUTION:
When you remove the cable, be sure to hold the plug and pull. Failure to do so may damage the fiber in the cable.
● Camera
● BS
BSF-300 rear view
1
Remove the cable while pulling the unlocking ring on the fiber cable plug toward you.
If the connector tip is locked, the fiber cable will not be removed. If it is locked, push the fiber cable toward the CAMERA
connector, and then remove as described above.
54
Camera rear view
CAMERA connector
CAMERA connector
Plug
HC-HD300 1412 VER1 (U)
Unlocking ring
Plug
Fiber cable
Fiber cable