Operating Procedures - Ikegami HC-HD300 Operation Manual

4.1 Operating Procedures

This chapter explains how to operate this product..
■
Initial Operation Check
――――――――――――――
When you use the camera for the first time after purchase, ensure that it works properly.
◆ 4.2 Switch Position Check
◆ 4.3 Turning ON Power
◆ 4.5 Output Signal Check
-Color-Bar Signal Check
-Test Pulse Check (CAL Signal)
-Check by Use of External Chart
■
Preparation Before Shooting
―――――――――――――――――
◆ 4.4 Viewfinder Adjustment
-Diopter Adjustment and Screen Adjustment
-Display Mode Check
◆ 4.5 Output Signal Check
-Color-Bar Signal Check
-Test Pulse Check (CAL Signal)
-Check by Use of External Chart
◆ 4.6 Auto Setup
-Auto Black Balance (ABB)
-Auto White Balance (AWB)
■
Shooting Settings and Adjustment
――――――――――――――――――――
Make IRIS and pedestal adjustments and various function settings according to the environment in which the
camera is used.
◆ Camera menu settings
Refer to "5. CAMERA SETTINGS and ADJUSTMENT" (P69)
◆ BS menu settings
Refer to the operation manual accompanying th BSF-300 or other base station to be used.
(P58)
(P60)
(P63)
(P62)
(P63)
(P65)
HC-HD300 1412 VER1 (U)
4.1 Operating Procedures
4
57