Enabling Scripting Of Safe Activex Controls - ZyXEL Communications NSA-220 Plus User Manual

automatically, the computer and the NSA will choose addresses for themselves
and be able to communicate.
Press and hold the RESET button (for about two seconds) until you hear a beep,
1
and then release it.
The NSA automatically restarts to complete the reset.
2
I forgot the password.
• The default password is 1234.
• If you have changed the password and forgotten it, you will have to reset the
NSA.
The NDU cannot discover my NSA.
• Confirm that the computer running the NDU has a network connection. See the
section on the NSA's LAN connection for related information.
• The computer running the NDU can only discover NSAs in the same subnet.
NSAs connected to the same switch or router as your NDU computer are usually
in the same subnet unless the router is doing subnetting or the switch is
implementing VLAN.
• The Memeo Autobackup program uses the same network port as the NDU to
discover the NSA. To avoid a port conflict, do not run the Memeo Autobackup
program at the same time as the NDU.
• Close the NDU and reopen it.

13.3.2 Enabling Scripting of Safe ActiveX Controls

If pages of the web configurator do not display properly in Internet Explorer,
check that scripting of safe ActiveX controls is enabled.
NSA-220 Plus User's Guide
Chapter 13 Troubleshooting
235