Registering Your Machine's Fax Number; Registering The Unit's Name - Canon imageRUNNER ADVANCE C5051 Getting Started

Registering Your Machine's Fax Number

You must store your machine's fax number. This number is printed on the document that you fax to the receiving party.
The number may also be displayed on the touch panel display of the receiving party's machine, depending on their type of
machine.
The fax number you can register here is for line 1. To register the fax number for an additional line, see e-Manual > Settings/Registration.
1
Press (Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [Set Line] →
[Line 1] → [Register Unit Telephone Number] .
2
Enter the unit's telephone number using
Details of each item are shown below.
[Space]: Press to insert a space between the area code and the local fax number.
[+]: Use to insert a country code. Press [+] after the country code, and before the fax number.
Press to move the position of the cursor.
[ ][ ]:
[Backspace]: Press to delete the last number entered.

Registering the Unit's Name

Your name or company's name must be registered as the unit's name (a department name is optional).
The registered unit name can be displayed on the touch panel display of the receiving party's machine and/or printed at the
top of the fax documents that you send as the sender's information. Some fax models also display sender information on the
touch panel display during transmission.
•
It is necessary to register a separate Unit Name if you have an additional line. (See e-Manual > Settings/Registration.)
•
The unit name can be printed in the TX Terminal ID.
1
Press (Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [Set Line] →
[Line 1] → [Register Unit Name] .
2
Enter a name → press [OK] .
- (numeric keys) → press [OK] .
13
13-5
Fax Settings