44: St/Cross Dly (Stereo/Cross Delay); 45: St.mlttap Dly (Stereo Multitap Delay) - Korg TRITON Le Electric Keyboard Parameter Manual

44: St/Cross Dly
(Stereo/Cross Delay)
This is a stereo delay, and can by used as a cross-feedback
delay effect in which the delay sounds cross over between the
left and right by changing the feedback routing.
Stereo In - Stereo Out
Left
High Damp Low Damp
Delay
Input Level D-mod
Stereo/Cross Feedback
High Damp Low Damp
Input Level D-mod
Delay
Right
Stereo/Cross
a
Switches between stereo delay and cross-feedback delay
L Delay (L Delay Time)
b
Sets the delay time for the left channel
R Delay (R Delay Time)
c
Sets the delay time for the right channel
L Fb (L Feedback)
Sets the feedback amount for the left channel
(Source)
d
Selects the modulation source of feedback amount
(Amount L)
Sets the modulation amount of the left channel feedback
R Fb (R Feedback)
Sets the feedback amount for the right channel
e
(Amount R)
Sets the modulation amount of the right channel feedback
HiDamp (High Damp)
f
Sets the damping amount in the high range
LoDamp (Low Damp)
g
Sets the damping amount in the low range
InLvl Mod (Input Level Dmod [%])
Sets the modulation amount of the input level
h
Src (Source)
Selects the modulation source for the input level
Spread
i
Sets the width of the stereo image of the effect sound
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
j
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
45: St.MltTap Dly
The left and right Multitap Delays have two taps respectively.
Changing the routing of feedback and tap output allows you
to create various patterns of complex effect sounds.
Stereo In - Stereo Out
Left
Wet / Dry
Input Level D-mod
Spread
Input Level D-mod
Stereo/Cross
Right
Wet / Dry
Mode: Normal
Stereo, Cross
0.0...680.0ms
Mode
a
0.0...680.0ms
Switches the left and right delay routing
Tap1 Time
b
–100...+100
Sets the Tap1 delay time
Tap2 Time
c
Off...Tempo
Sets the Tap2 delay time
Tap1 Level
d
–100...+100
Sets the Tap1 output level
Fb(T2) (Tap2 Feedback)
–100...+100
Sets the Tap2 feedback amount
(Source)
e
–100...+100
Selects the modulation source of the Tap2 feedback amount
(Amount)
0...100%
Sets the modulation amount of the Tap2 feedback amount
Fx:43
HiDamp (High Damp)
0...100%
Sets the damping amount in the high range
f
Fx:43
LoDamp (Low Damp)
–100...+100
Sets the damping amount in the low range
Fx:37,
InLvl Mod (Input Level Dmod [%])
Off...Tempo
Sets the modulation amount of the input level
Fx:37 g
Src (Source)
–50...+50
Selects the modulation source for the input level
Fx:43
Spread
Dry, 1:99...99:1, Wet
Sets the width of the stereo image of the effect sound
Off...Tempo
(Source)
h
Selects the modulation source of the effect sound's stereo image
width
–100...+100
(Amount)
Sets the modulation amount of the effect sound's stereo image width
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
i
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: Mode
You can change how the left and right delay signals are panned by
modifying the routing of the left and right delay as shown in the
figure above. You need to input different sounds to each channel
in order for this parameter to be effective.
d: Tap1 Level
This parameter sets the output level of Tap1. Setting a different
level from Tap2 will add a unique touch to a monotonous delay
and feedback.
(Stereo Multitap Delay)
Feedback
Delay
(1)
High Damp Low Damp
Mode Tap1 Level
High Damp Low Damp (1)
Delay
Feedback
Mode: Cross Feedback Mode: Cross Pan1
Normal, Cross Feedback, Cross Pan1, Cross Pan2
Wet / Dry
(2)
Tap1=(1)
Mode Spread
Tap2=(2)
(2)
Wet / Dry
Mode: Cross Pan2
0.0...680.0ms
0.0...680.0ms
0...100
–100...+100
Off...Tempo
–100...+100
0...100%
Fx:43
0...100%
Fx:43
–100...+100
Fx:37,
Off...Tempo
Fx:37
–100...+100
Fx:43,
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
189