044: Stereo/Cross Delay; 045: St. Multitap Delay (Stereo Multitap Delay) - Korg Triton Studio Parameter Manual

044: Stereo/Cross Delay

This is a stereo delay, and can by used as a cross-feedback
delay effect in which the delay sounds cross over between the
left and right by changing the feedback routing.
Stereo In - Stereo Out
Left
Delay
Input Level D-mod
Stereo/Cross
Input Level D-mod
Delay
Right
Stereo/Cross
a
Switches between stereo delay and cross-feedback delay
L Delay Time [msec]
b
Sets the delay time for the left channel
R Delay Time [msec]
c
Sets the delay time for the right channel
L Feedback
Sets the feedback amount for the left channel
Src
d
Selects the modulation source of feedback amount
Amt L
Sets the modulation amount of the left channel feedback
R Feedback
Sets the feedback amount for the right channel
e
Amt R
Sets the modulation amount of the right channel feedback
High Damp [%]
f
Sets the damping amount in the high range
Low Damp [%]
g
Sets the damping amount in the low range
Input Level Dmod [%]
Sets the modulation amount of the input level
h
Src
Selects the modulation source for the input level
Spread
i
Sets the width of the stereo image of the effect sound
Wet/Dry
Sets the balance between the effect and dry sounds
Src
j
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
212
Wet / Dry
High Damp Low Damp
Feedback
Spread
High Damp Low Damp
Stereo/Cross
Wet / Dry
Stereo, Cross
0.0...680.0msec
0.0...680.0msec
–100...+100
Off...Tempo
–100...+100
–100...+100
–100...+100
0...100%
0...100%
–100...+100
Fx:037,
Off...Tempo
–50...+50
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
045: St. Multitap Delay
(Stereo Multitap Delay)
The left and right Multitap Delays have two taps respectively.
Changing the routing of feedback and tap output allows you
to create various patterns of complex effect sounds.
Stereo In - Stereo Out
Left
Input Level D-mod
Input Level D-mod
Right
Mode: Normal
Mode
a
Switches the left and right delay routing
Tap1 Time [msec]
b
Sets the Tap1 delay time
Tap2 Time [msec]
c
Sets the Tap2 delay time
Tap1 Level
d
Sets the Tap1 output level
Feedback (Tap2)
Sets the Tap2 feedback amount
Src
e
Selects the modulation source of the Tap2 feedback amount
Fx:043
Amt
Sets the modulation amount of the Tap2 feedback amount
Fx:043
High Damp [%]
f
Sets the damping amount in the high range
Low Damp [%]
g
Sets the damping amount in the low range
Fx:037
Input Level Dmod [%]
Sets the modulation amount of the input level
h
Fx:043
Src
Selects the modulation source for the input level
Spread
Sets the width of the stereo image of the effect sound
Src
i
Selects the modulation source of the effect sound's stereo image
width
Amt
Sets the modulation amount of the effect sound's stereo image width
Wet/Dry
Sets the balance between the effect and dry sounds
Src
j
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: Mode
You can change how the left and right delay signals are panned by
modifying the routing of the left and right delay as shown in the
figure above. You need to input different sounds to each channel
in order for this parameter to be effective.
d: Tap1 Level
This parameter sets the output level of Tap1. Setting a different
level from Tap2 will add a unique touch to a monotonous delay
and feedback.
Feedback
Delay
(2)
(1)
High Damp Low Damp
Mode
Mode Tap1 Level
High Damp Low Damp (1)
(2)
Delay
Feedback
Mode: Cross Feedback Mode: Cross Pan1
Normal, Cross Feedback, Cross Pan1, Cross Pan2
Wet / Dry
Tap1=(1)
Spread
Tap2=(2)
Wet / Dry
Mode: Cross Pan2
0.0...680.0msec
0.0...680.0msec
0...100
–100...+100
Off...Tempo
–100...+100
0...100%
Fx:043
0...100%
Fx:043
–100...+100
Fx:037,
Off...Tempo
Fx:037
–100...+100
Fx:043,
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100