Resizing Originals To Fit The Roll Width (Mac Os) - Canon iPF670 User Manual

iPF670
4
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5
Select the printing application in the
6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the
8
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4 or Letter (8.5"x11").
9
C
Select the Enlarged/Reduced Printing check box.
•
If the
not displayed on the Page Setup sheet, clear the
Note
B
10
E
Click Fit Roll Paper Width.
•
After you click
loaded roll in the Roll Paper Width list and click OK.
Note
•
Make sure the roll paper width you specify matches the width of the loaded roll.
11
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see "Confirming Print Settings ."
Note

Resizing Originals to Fit the Roll Width (Mac OS)

Resizing Originals to Fit the Roll Width (Mac OS)

This topic describes how to enlarge originals before printing to match the roll width, based on the following exam-
ple.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
Paper: Roll paper
•
User's Guide
Downloaded from ManualsPrinter.com Manuals
E
Print Target list.
L
Paper Source list.
C
Enlarged/Reduced Printing check box is
Borderless Printing check box.
E
Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the
Resizing Originals to Fit the Roll Width (Mac OS)
P.143
➔
61