3: Maintenance and Upgrade Procedures
Installing the IO9 Board
78
3. Gently grasp both ends of the IO9 board. Then lift straight up until it clears the PCI
slot. Tilt the front end of the IO9 board upward until it clears the edge of the chassis.
Then remove the IO9 board from the enclosure and place it in a safe location (see
Figure 3-18).
R
R
Removing the IO9 Board
Figure 3-18
This completes the IO9 board removal. To install a new IO9 board, proceed to the next
section.
Follow these steps to install a replacement IO9 board:
007-4564-001