Power Supply Specifications; I/O Port Specifications; Ethernet 10-Base-T/100-Base-T Port; Table A-2 Power Supply Specifications - Silicon Graphics Tezro Hardware User's Manual

A: Technical Specifications and Pinouts
Power Supply Specifications
I/O Port Specifications

Ethernet 10-Base-T/100-Base-T Port

128
Table A-2 shows the power supply specifications for the workstation.
Table A-2 Power Supply Specifications
Feature
AC line voltage rating
Output ratings
Combined output Limit
This section contains specifications and port pinout information for the I/O ports of the
workstation. The ports are discussed in the following sections:
• "Ethernet 10-Base-T/100-Base-T Port" on page 128
• "Keyboard and Mouse Ports" on page 130
• "Serial Ports" on page 131
• "Serial Cables and Adapter Specifications" on page 132
The workstation auto-selects the Ethernet port speed and type (duplex versus
half-duplex) when the workstation is booted, based on what it is connected to.
Figure A-1 shows the Ethernet port.
Specification
90-264 VAC RMS nominal, 50-60 Hz
24 amps @ 3.3 V
24 amps @ 5 V
8 amps @ +12 V1
12 amps @ +12 V2
18 amps @ +12 V3
0.5 amps @ -12 V
2 amps @ +5 standby
Combined 3.3-V, 5-V, and 12-V output is limited to 500 watts.
007-4564-001