Table 4-3 Runalldiags Command-Line Options - Silicon Graphics Tezro Hardware User's Manual

007-4564-001
Follow these steps to run the runalldiags script:
Note: You must have root level access to the system to run online diagnostics.
1. Enter the following command at the IRIX command prompt to change to the
directory that contains the diagnostics:
#>cd /usr/diags/bin
2. Enter the following command to start the script:
#>./runalldiags [
Note: When you run runalldiags in -normal or -extensive modes, you should
run it from the console. The Ethernet testing that runalldiags performs in -normal
and -extensive modes disrupts any telnet sessions on the system.
Refer to Table 4-3 for descriptions of the command-line options.
Table 4-3 runalldiags Command-line Options
Option
-h | -help
-basic
-normal
-extensive
-host <host>
-d <directory>
If a diagnostic fails, the script saves the output from the diagnostic in a file in the
directory (for example,
indicates the actual name of the file. When a diagnostic fails, the script continues to run
the remaining diagnostics.
options
]
Description
Displays help information
Runs the script in basic mode
Runs the script in normal mode (default)
Runs the script in extensive mode
Specifies a system to target for network tests
Specifies the directory that contains the online diagnostics
/tmp/diagTestOutput.1.olenet
Diagnostics
). Output from the script
/tmp
121