Figure 3-16 Disconnecting The Cables And Retention Strap; Figure 3-17 Opening The Pci Gate - Silicon Graphics Tezro Hardware User's Manual

007-4564-001
1. Disconnect the SCSI and IDE cables from the IO9 board. Then loosen the PCI
retention strap (see Figure 3-16).
IDE connector
SCSI connector
Disconnecting the Cables and Retention Strap
Figure 3-16
2. Remove the three screws that secure the PCI gate. Then open the PCI gate (see
Figure 3-17).
R
R
PCI gate
Figure 3-17 Opening the PCI Gate
IO9 retention strap
R
R
Replacing the IO9 Board
77