After Installing The Board And Cables - Silicon Graphics Octane2 Duo Installation Manual

Hide thumbs Also See for Octane2 Duo:

Table of Contents

C: Cabling and Configuring PCI Ethernet Boards

After Installing the Board and Cables

When the board is installed and connected and the Octane2 workstation is powered on,

use the following information for conﬁguration.

Certain PCI boards require some conﬁguration, others do not. Use the table below to

determine whether you need to conﬁgure the board.

Table C-4

Determining Which Boards to Conﬁgure

Conﬁguration Needed

All networking boards

Refer to the Personal System Administration Guide or IRIX Admin: Networking and Mail for

instructions on conﬁguring software. Both documents are online and accessible from

Toolchest > Help > Online Books. The Personal System Administration Guide is under SGI

End User, and the IRIX Admin: Networking and Mail guide is under SGI Admin.

Conﬁguration Not Needed

Mouse, keyboard, SCSI, Radical

007-4506-001

Table of Contents

Do you have a question about the Octane2 Duo and is the answer not in the manual?