Figure 3-7 Reconnecting The Cables To The Workstation - Silicon Graphics Tezro Hardware User's Manual

3: Maintenance and Upgrade Procedures
62
1. Reconnect all of the system cables to the rear of the enclosure (see Figure 3-7).
Figure 3-7 Reconnecting the Cables to the Workstation
2. Press the power buttons on your workstation and monitor.
3. If your workstation does not boot correctly, see Chapter 4, "Troubleshooting and
Diagnostics."
This completes the procedure for returning the workstation to service.
R
R
007-4564-001