Silicon Graphics Tezro Hardware User's Manual page 144

4: Troubleshooting and Diagnostics
Example 1
122
Note: If you have USB devices connected to your workstation, you must disconnect the
USB cables from the rear of the enclosure after the online diagnostics have finished
running. Then reconnect the cables to restore the USB devices.
Online diagnostics display
a test fails. If any of the components do not pass the online diagnostics, contact your
service representative.
The following example shows output from running runalldiags in basic mode with
no errors:
olab1 12# ./runalldiags -basic
Running online diagnostics at Basic level
Time: Tue Jun 24 16:25:36 CDT 2003
System Information: IRIX64 olab1 6.5 6.5.20m 04091957 IP35
Plan on running: olmem pandora
olmem - Online Memory Diagnostic
message)
PASS(olmem)
pandora - System Stress Test
PASS(pandora)
Finished running at Tue Jun 24 17:00:05 CDT 2003
Ran: 2 Failed: 0
[testname] when a test passes and
PASS
(Check /var/adm/SYSLOG for error
[testname] when
FAIL
007-4564-001