Silicon Graphics Tezro Hardware User's Manual page 124

3: Maintenance and Upgrade Procedures
102
9. Connect the replacement L1 display cable to the interface board and the L1 display
board (see Figure 3-38).
10. Install the two screws that secure the L1 display board to its bracket (see
Figure 3-38).
11. Align the hooks on the bracket with the holes in the enclosure. Insert the hooks into
the holes, and press down to seat the housing on the front of the enclosure (see
Figure 3-38).
12. Slide the outer cover over the L1 display bracket. Then install the two screws that
secure the L1 display bracket to the front of the enclosure (see Figure 3-38).
007-4564-001