Table of Contents
Advertisement
Commissioning and use during operation
"Diagnosis/
Simulation" menu
items
Current diagnosis
Displays the current diagnosis message.
message
Last
Displays the last diagnosis message.
diagnosis message
Diagnosis list
All the diagnosis messages pending are output.
Note: Only visible if diagnosis messages are present.
Event log/audit trail
Events such as alarm set point infringement and power failure are listed in the correct time sequence.
Submenu: device
Displays important device information.
information/ENP
Firmware version
Serial No.
Order code
Device tag
ENP version
Program name
Application
IP
Modbus TCP
Device operating time
98
6.6.4
Main menu - Diagnosis/simulation
Unit information and service functions for a swift unit check.
Fig. 74:
Main menu, submenu: Diagnosis/simulation
Configurable parameters
(factory settings are highlighted in bold)
Displays the firmware version of the unit. Cannot be changed. Please quote if you have
any questions on the unit.
Displays the serial number of the unit. Please quote if you have any questions on the
unit.
Displays the order code of the unit. Please quote if you have any questions on the unit.
Individual unit identifier (max. 22 characters).
Displays the ENP (electronic name plate) version of the unit. Cannot be changed. Please
quote if you have any questions on the unit.
Displays the program name of the unit. Cannot be changed. Please quote if you have
any questions on the unit.
Displays the installed application packages of the unit. Cannot be changed. Please quote
if you have any questions on the unit.
If the unit gets its Ethernet settings by DHCP, the current IP address is displayed here.
If the unit gets its Ethernet settings by DHCP, the current IP address is displayed here.
Indicates how long the unit was in operation.
Advanced Graphic Data Manager
Advertisement
Table of Contents
