Camille Bauer LINAX A325 Operating Instructions Manual page 40

Commissioning and use during operation
40
6.4.1 Setup - System
Settings that are not channel specific, this means date, time, communication etc.
Procedure for basic settings in the "System" menu:
Make date/time settings (e.g. select region for summertime changeover)
Security: choose whether the setup should be protected and how
Signal analysis: activate the desired signal analysis here (e.g. daily, weekly or annual analysis)
External memory: make settings for the external memory (SD card)
Screen saver: activating the screen saver increases the operating life of the rear illumination
Keyboard (only relevant if an external USB keyboard is connected)
Bar code reader (only relevant if a USB bar code reader is connected)
Depending on the selected function, the unit's user interface adapts itself, so that each time
only parameters that are required for safe unit functioning have to be checked/set.
Start
▾
Select an operating language from the list
▾
Assign a device designation
▾
Select a decimal separator (comma or point)
▾
Select the temperature unit (°C, °F, K)
▾
▾
▾
Select communication
▾
▾
▾
▾
▾
▾
End
Advanced Graphic Data Manager