Table of Contents
Advertisement
Commissioning and use during operation
"Application"
menu items
Submenu: Web server
Setup for operation of the unit as a Web server. Instantaneous values can be read off using an Internet Browser,
e.g. MS Internet Explorer. Call: http://<IP address>
You can find the IP address of the device under "Setup -> System -> Communication -> Ethernet". A fixed IP
address is required!
Note: Do not enter any leading zeros in the IP address!
You can specify that the page should be automatically refreshed by calling up "http://<IP address>/
web?refresh=x". (Note: x refers to the refresh interval in seconds e.g. http://10.55.81.109/web?refresh=20)
Fig. 49:
Using a Web server to remotely monitor process values
The unit is equipped with an integrated Web server. This makes it possible for the user to display the
instantaneous values in a standard Web browser, such as Internet Explorer or Firefox, on a PC. A maximum
of 4 users can access the unit simultaneously via the Web server.
Note: The port "80" must be enabled at the firewall of the Internet PC. Please contact your system
administrator!
A physical Web link must be established via LAN or Internet to display the values on the Web browser of a PC:
Fig. 50:
Active
Submenu: Printer
Printer settings
Note: Only relevant if a printer is directly connected to the device.
Printer
80
(factory settings are highlighted in bold)
Setup Application, submenu Webserver
Router
Ethernet
Internet PC
Telephone Network
Ethernet
Router
Remote monitoring with Web browser
Configurable parameters
Switch the Web server function on or off (= factory default). The
instantaneous values can only be displayed by means of an Internet
browser when the Web server is active.
Note: Only possible using the Ethernet interface!
Picklist: no (off), yes (on)
Please select the printer you wish to use.
Picklist: USB printer, RS232 / printer (only at "Batch" option)
Advanced Graphic Data Manager
Direct
access
code
65000/000
67010/000
Advertisement
Table of Contents
