Table of Contents
Advertisement
Commissioning and use during operation
"Expert" menu
items
Submenu: Diagnosis/
Displays important device information.
Simulation, Device
information/ENP
Fig. 51:
Firmware version
Serial No.
Order code
Device tag
ENP version
Program name
Application
Reset device oper. time
Reset LCD operating time
Submenu: Diagnosis /
Settings for the simulation mode.
Note: If required, use the "Signal analysis- Reset to zero" function, so that the values of the simulated signals
Simulation,
Simulation
do not corrupt your true minima/maxima/quantities after switching back to normal operation. If the previous
signals are still needed, save them on the SD card beforehand.
"Normal operation": the unit records the connected measuring points.
"Simulation": instead of operating with the real measurement points connected, the signals are simulated (using
the actual settings).
82
6.4.5
Expert - Diagnosis/Simulation
Unit information and service functions for a swift unit check.
Configurable parameters
(factory settings are highlighted in bold)
Expert, submenu: Diagnosis/Simulation, Device information/ENP
Displays the firmware version of the unit. Cannot be changed. Please
quote if you have any questions on the unit.
Displays the serial number of the unit. Please quote if you have any
questions on the unit.
Note: Only appears once the service code has been entered!
Displays the order code of the unit. Please quote if you have any
questions on the unit.
Note: Only appears once the service code has been entered!
Individual unit identifier (max. 22 characters).
Displays the ENP (electronic name plate) version of the unit. Cannot be
changed. Please quote if you have any questions on the unit.
Displays the program name of the unit. Cannot be changed. Please quote
if you have any questions on the unit.
Displays the installed application packages of the unit. Cannot be
changed. Please quote if you have any questions on the unit.
Resets the unit operating time to 0 hours. Picklist: no, yes
Note: Only appears once the service code has been entered!
Resets the LCD operating time to 0 hours. Picklist: no, yes
Note: Only appears once the service code has been entered!
Advanced Graphic Data Manager
Direct
access
code
91000/000
91005/000
91010/000
91015/000
91020/000
91025/000
91030/000
91035/000
91040/000
92000/000
Advertisement
Table of Contents
