Table of Contents
Advertisement
Commissioning and use during operation
"Inputs" menu
items
Submenu:
First select the analog input to be linearized. The "Linearization" menu item only appears for active analog
Linearization,
inputs.
universal input x
Note: Only current and voltage inputs can be linearized.
Fig. 42:
Linearization
Number of points
Dim. linearized value
Comma linearized value
Range start
Meas. range end
Zoom start
Zoom end
Edit table
Only if operating via PC software
68
Setup – Inputs, submenu:
Linearization
Configurable parameters
(factory settings are highlighted in bold)
Setup Inputs - Linearization, submenu "Universal input 1"
Specify whether this analog input should be linearized.
Picklist: no, yes
Specify how many points your linearization table has.
Note: the first and last points always have to be the start and end of the
measuring range. Up to 32 points can be configured. Factory setting: 2
points
Unit/dimension for the linearized value.
Number of places after decimal point for the display. Picklist: 0 to 5
number of places after the decimal point. This information is only used
to better display the measured value. Factory setting: one (X,Y)
e.g. measured value: 20.12348 l/s
The display shows:
None: 20 l/s
One: 20.1 l/s
Two: 20.12 l/s
Three: 20.123 l/s
Four: 20.1235 l/s
Five: 20.12348 l/s
Note: The value is rounded off where necessary.
The start of measuring range is displayed here. Fixed settings - cannot be
changed.
The end of measuring range is displayed here. Fixed settings - cannot be
changed.
If the total transmitter range is not being used then the lower value of
the required range can be entered here (higher resolution). Example:
transmitter 0-14 pH, required range: 5-9 pH. Set up "5" here. The zoom
has no influence on the storage.
As in "Zoom start". Enter the upper value of the required range here.
Example: transmitter 0-14 pH, required range: 5-9 pH. Enter "9" here.
Edit the linearization table here.
Advanced Graphic Data Manager
Direct access
code
36000/000 to
36000/015
36005/000 to
36005/015
36010/000 to
36010/015
36015/000 to
36015/015
36020/000 to
36020/015
36025/000 to
36025/015
36026/000 to
36026/015
36027/000 to
36027/015
36030/000 to
36030/015
Advertisement
Table of Contents
