Table of Contents
Advertisement
Advanced Graphic Data Manager
"System" menu
items
Day
Only for "Manual summer time
changeover"
Month
Only for "Manual summer time
changeover"
Date
Only for "Manual summer time
changeover"
Time
Only for "Manual summer time
changeover"
Submenu "Security"
Settings that protect the unit against unauthorized operation and configuration.
Fig. 26:
Protected by
User logged in
Only if "Protected by: FDA 21
CFR Part 11"
Release code
Configurable parameters
(factory settings are highlighted in bold)
Day, when in the autumn a change from summer to normal time occurs.
Picklist: Sunday, Monday to Saturday
Month, when in the autumn a change from summer to normal time
occurs. Picklist: January to October, November, December
Displays the calculated changeover date.
Time when the time is moved back by 1 hour on the day of the
changeover from summer time to normal time. (Format: hh:mm)
Setup - System, submenu "Security"
Specify how the unit should be protected:
"Open access": the unit can be operated and configured without any
restrictions.
"Release code": the unit configuration is protected by a code. There is
free access to all the other functions.
"FDA 21 CFR Part 11":
The unit is protected by a user administration system. Actions have to be
authenticated using an ID and password.
Note: user administration is managed outside the setup. Page 100
The dedicated Relays/OC are active while a User is logged in.
Picklist: Not used, Relay x (xx-xx)
Using this code setup access can be protected from unauthorized
persons. In order to change any parameter the correct code must be
entered. Factory setting: "0000", i.e. changes are possible any time.
Tip: make a note of the code and store in a safe place out of the reach of
unauthorized persons.
This release code also has to be entered in the PC software supplied.
Commissioning and use during operation
Direct access
11065/000
11070/000
11080/000
18000/000
18030/000
18005/000
code
43
Advertisement
Table of Contents
