Interface Connection - Camille Bauer LINAX A325 Operating Instructions Manual

Wiring
18
4.3

Interface connection

4.3.1 USB at the front of the unit
3
1 2 4
Fig. 7: Front of unit with open flap/keyboard
1: USB A socket "host" e.g. for USB memory stick, external keyboard, bar code reader or printer
2: USB B socket "function" e.g. to connect to PC or laptop
3: LED at SD slot. Yellow LED lit when the unit writes to the SD card or reads it.
4: Slot for SD card
5: Navigator
1 x USB connection, type A (host)
A USB 2.0 connection is available on a shielded USB A socket at the front of the unit. A USB stick
as a memory medium, a keyboard, a USB hub, a bar code reader or a printer (PCL5c or higher) can
be connected to this interface.
1 x USB connection, type B (function)
A USB 2.0 connection is available on a shielded USB B socket at the front of the unit. This can be
used to connect the unit for communication with a laptop for example.
4.3.2 USB at the rear of the unit
2 x USB connection, type A (host) (interface slot)
Two USB 2.0 connections are available on shielded USB A sockets at the rear of the unit. A USB
stick as a memory medium, a keyboard, a USB hub, a bar code reader or a printer (PCL5c or higher)
can be connected to these interfaces.
• The USB 2.0 connections are compatible with USB 1.1, i.e. communication is possible.
• The assignment of the USB ports corresponds to the standard such that shielded standard
cables with a maximum length of 3 meters (9.8 ft) can be used here.
• Multiple USB sticks cannot be operated simultaneously. The USB stick that was first
connected has priority.
Advanced Graphic Data Manager
5