Advanced Graphic Data Manager
2. Select the function of the digital channel (also optionally possible via "Modbus" or "Profibus" fieldbus)
▾
3. Control input
3. On/off event
▾
4. Enter channel
4. Enter channel
identifier
▾
5. Select the action
5. Enter description for
"HIGH" and "LOW"
▾
6. End
6. Select whether the
event message has to be
acknowledged
7. Choose whether the
event should be saved in
the event log
Yes
▾
8. Enter
event text
for change
in status
from L->H
and H->L
▾
9. Record
duration?
▾
10. End
Setup – Inputs, submenu: digital inputs
Procedure for setting the signals of the digital inputs:
▾
▾
3. Pulse counter
▾
▾
4. Enter channel
identifier
identifier
▾
▾
5. Enter the unit/
dimension
conditions
▾
▾
6. Select the number of
decimal places
▾
▾
7. Enter the pulse
factor
No
?
▾
8. End
8. Where necessary,
enter the current
counter reading to
continue a totalizer
▾
9. Select the display for
the counter type (e.g.
totalizer)
▾
10. End
1. Start
▾
▾
3. Operational time
▾
4. Enter channel
identifier
▾
5. Where necessary,
5. Enter description for
enter the current
counter reading to
continue a totalizer
▾
6. Select the display for
the counter type (e.g.
event message has to be
totalizer)
▾
7. End
7. Choose whether the
event should be saved in
8. Enter
event text
for change
in status
from L->H
and H->L
9. Record
duration?
11. Select the display for
Commissioning and use during operation
▾
3. Event + operation
3. Quantity from time
time
▾
4. Enter channel
4. Enter channel
identifier
▾
5. Enter the unit/
"HIGH" and "LOW"
dimension
conditions
▾
6. Select whether the
6. Select the number of
decimal places
acknowledged
▾
7. Select the factor
the event log
Yes
No
▾
▾
▾
8. Where necessary,
enter the current
counter reading to
continue a totalizer
▾
▾
▾
9. Select the display for
the counter type (e.g.
▾
10. Where necessary,
enter the current
counter reading to
continue a totalizer
▾
the counter type (e.g.
totalizer)
▾
12. End
▾
▾
identifier
▾
▾
▾
▾
▾
totalizer)
▾
10. End
59