Camille Bauer LINAX A325 Operating Instructions Manual page 78

Commissioning and use during operation
"Application"
menu items
Display green
Display
Display violet
Display
Display orange
Display
Display cyan
Display
Display brown
Display
Curve display
Curve display
78
Configurable parameters
(factory settings are highlighted in bold)
Color for displaying the assigned input.
Note: Only the channels that were assigned to a group are saved.
Channels can be assigned to several groups. However, these groups then
have to have the same save cycle (except when the save and alarm cycle
are set to "off").
Picklist: switched off, analog x, digital x, maths x
Please select what data from the selected channel should be displayed.
Picklist: instantaneous value/state,... (depending on the channel
settings)
Color for displaying the assigned input.
Note: Only the channels that were assigned to a group are saved.
Channels can be assigned to several groups. However, these groups then
have to have the same save cycle (except when the save and alarm cycle
are set to "off").
Picklist: switched off, analog x, digital x, maths x
Please select what data from the selected channel should be displayed.
Picklist: instantaneous value/state,... (depending on the channel
settings)
Color for displaying the assigned input.
Note: Only the channels that were assigned to a group are saved.
Channels can be assigned to several groups. However, these groups then
have to have the same save cycle (except when the save and alarm cycle
are set to "off").
Picklist: switched off, analog x, digital x, maths x
Please select what data from the selected channel should be displayed.
Picklist: instantaneous value/state,... (depending on the channel
settings)
Color for displaying the assigned input.
Note: Only the channels that were assigned to a group are saved.
Channels can be assigned to several groups. However, these groups then
have to have the same save cycle (except when the save and alarm cycle
are set to "off").
Picklist: switched off, analog x, digital x, maths x
Please select what data from the selected channel should be displayed.
Picklist: instantaneous value/state,... (depending on the channel
settings)
Color for displaying the assigned input.
Note: Only the channels that were assigned to a group are saved.
Channels can be assigned to several groups. However, these groups then
have to have the same save cycle (except when the save and alarm cycle
are set to "off").
Picklist: switched off, analog x, digital x, maths x
Please select what data from the selected channel should be displayed.
Picklist: instantaneous value/state,... (depending on the channel
settings)
The current instantaneous values are displayed with the measured value
curves as standard. Alternatively, this instantaneous value display can
also be hidden. As a result, more data can be shown on the display.
Picklist: no instantaneous values, with instantaneous values
Specify the background color for the curve display. Picklist: white
background, black background
Advanced Graphic Data Manager
Direct
access
code
38160/000 to
38160/009
38165/000 to
38165/009
38170/000 to
38170/009
38175/000 to
38175/009
38180/000 to
38180/009
38185/000 to
38185/009
38190/000 to
38190/009
38195/000 to
38195/009
38200/000 to
38200/009
38205/000 to
38205/009
38210/000 to
38210/009
38215/000 to
38215/009