Camille Bauer LINAX A325 Operating Instructions Manual page 33

Advanced Graphic Data Manager
6.3.3 Setup via interface and PC software supplied
RS232
USB
Ethernet,
RS485
Example: Setup via PC software supplied
Procedure for setup via interface and PC software supplied:
Install the PC software supplied on the PC or laptop (see Section 5.6)
Connect the unit interface (RS232 / RS485, USB or Ethernet) to the PC
Check selected communication settings in the device ( Chap. 6.4.4 communication)
Create the new device in the PC software supplied and make the interface settings
The current unit settings are displayed if the PC software supplied recognizes the unit. Now, all the parameters can be
Save the settings in the unit database and send them to the unit
Commissioning and use during operation
Start
▾
▾
▾
▾
▾
configured (see the following sections)
▾
▾
End
33