Table of Contents
Advertisement
Advanced Graphic Data Manager
"Application"
menu items
Submenu:
Change set points
Set points
6.4.4
Setup - Application
Specify the various application-specific settings (e.g. limit values, signal grouping, text, softkeys,
Web server, telealarm (option)).
Depending on the selected function, the unit's user interface adapts itself, so that each time
only parameters that are required for safe unit functioning have to be checked/set.
The descriptions of the operating items for optional application packages can be found in
the additional Operating Instructions on the CD-ROM or as hardcopy (part of the scope of
delivery).
Fig. 45:
Setup Application
Configurable parameters
(factory settings are highlighted in bold)
Specify where the set points can be changed. If you select "Also in menu
"Extras"", you can also change the set points in the Extras menu in
addition to during the setup. Here, you can adapt your set points to suit
the process even if the setup is locked. In addition, a softkey can be
assigned the "Change set points" function.
Note: this function can/should be protected by the set point code.
Picklist: only in the setup, also in menu "Extras"
Commissioning and use during operation
60000/000
Direct
access
code
73
Advertisement
Table of Contents
