Table of Contents
Advertisement
Advanced Graphic Data Manager
Menu items "SD card" or
"USB stick"
Load user administration
Screenshot
Submenu "Process-related
graphic"
Delete
Only with SD card
!
Loads all the settings and user accounts from the data carrier. The file has the extension .ids.
Note: All the existing settings/accounts are overwritten!
Save the current measured value display as a bitmap on the SD card or on the USB stick.
Load, export or delete process-related graphics.
Note: Process-related graphics have to be created on a PC. Please pay attention to the information provided in
Chap. 6.6.7, Page 103.
Group
Load
Export
Delete
Deletes all the data generated by the device that are on the SD card.
Note: If a release code has been set up then the SD card can only be deleted after this code has been entered. When the
user administration function is active, this action can only be performed by the administrator.
Without affecting the internal memory, data packages are copied block-by-block to the data carrier.
Tests are also made to determine whether the data have been written onto the data carrier without
any errors. The same happens when storing the data on the PC with the associated PC software.
Note!
• Before removing the data carrier, select "Update". The current data block is closed and
saved to the data carrier. This ensures that all current data (until the last save) are
included on the data carrier.
• You are informed before the data carrier is 100% full. This is achieved by an
acknowledgeable message on the display, which indicates that the data carrier being
written to needs changing (only for "Stack memory" ext. save mode, not for "Ring
memory FIFO". ) In addition, a relay can be switched.
• Your unit knows which data have already been copied onto the data carrier. Should you
ever forget to change the data carrier in time (or if no data carrier has been inserted), the
new data carrier is filled with the missing data from the internal memory - in as far as the
data are still available there.
• Since measured value acquisition/registration has highest priority, it can take some
minutes until the contents of the internal memory are copied onto the data carrier.
• If a user is accessing the SD card or the USB stick, the LED lights up. During this time,
the data carrier should not be removed.
Commissioning and use during operation
Description
Select the group for which the action should be executed.
Note: A process graphic can only be loaded if the corresponding group was
configured beforehand.
Loads a process-related graphic from an external memory medium to the device
memory.
Note: Function is only possible if an appropriate bitmap (bmp) is on the data
carrier.
The process-related graphic can then be edited in the "Process-related graphic
editor" context menu ( Page 105).
Saves the process-related graphic available in the device to the external memory
medium to transfer the graphic to another device.
Deletes the selected process-related graphic from the memory.
93
Advertisement
Table of Contents
