Table of Contents
Advertisement
Advanced Graphic Data Manager
"Inputs" menu
items
Check table
Submenu: Points x
Number depends on the setting
under "Number of points"
Configurable parameters
(factory settings are highlighted in bold)
Here, you can check whether the linearization table has been entered
correctly.
Picklist: no, yes
Enter the points for the linearization table here.
Note: the first and last points always have to be the start and end of the
measuring range. In the PC software, only the points can be viewed
here. To change the points, use the "Edit table" function.
x-value
x–value of the linearization (value that comes from the input of the unit).
e.g. if 10 cm corresponds to 20 liters ––> enter 10.
y-value
Here, enter the y–value the measured x–value corresponds to. e.g. if 10
cm corresponds to 20 liters ––> enter 20.
Commissioning and use during operation
Direct access
36035/000 to
36035/015
36100/000 to
36100/031
36105/000 to
36105/031
code
69
Advertisement
Table of Contents
