Table of Contents
Advertisement
Advanced Graphic Data Manager
"Inputs" menu
items
Set point
Only for "Action – Individual LV
on/off"
Totalizer
Only for the "Pulse counter",
"Operational time" and "Event +
operation time" and "Quantity
from time" functions.
Copy settings
Configurable parameters
(factory settings are highlighted in bold)
Select what limit value should be switched on and off by means of this
control input.
Picklist: switched off, set point x
Initial setting for the totalizer. Useful when continuing a measurement
performed to date with an electromechanical counter. 12-character
entry. Factory setting: 0
Copies settings from actual channel to selected channel. The last two
characters in the channel name of the target channel are replaced by the
channel number.
Note: makes unit setup easier if practically the same settings apply for
several measuring points (e.g. several operation time counters).
Commissioning and use during operation
Direct access
40095/000 to
40095/013
40100/000 to
40100/013
40110/000 to
40110/013
code
63
Advertisement
Table of Contents
