Table of Contents
Advertisement
Commissioning and use during operation
"System" menu
items
Screensaver
Function
ON daily from
Only for "Switched daily"
OFF daily from
Only for "Switched daily"
Screensaver
Submenu "Keyboard"
Keyboard settings (only relevant if a USB keyboard is connected to the unit)
Keyboard layout
Submenu "Bar code
Instructions for operating a bar code reader:
reader"
• It has to act like a HID keyboard
• Texts must be terminated with a carriage return.
Fig. 34:
Character set
Save as event
50
Configurable parameters
(factory settings are highlighted in bold)
"Switched off": LCD is always switched on
"On after x min": display turns dark after 10, 30 or 60 minutes. All other
functions remain in operation. Press an operating key: illumination is
switched back on.
"Switched daily": specify time. With this setting, the display turns dark 1
minute after the last key was pressed.
"Switch off display": the unit switches off the display when the
screensaver is activated.
Set time (hh:mm) from which the rear illumination is to be switched off
(e.g. shift end time). Factory setting: 20:00
Set time (hh:mm) from which the rear illumination is to be switched on
(e.g. shift start time). Factory setting: 07:00
"Off on alarm": the screensaver is automatically deactivated in an
alarm condition (e.g. limit value, cable open circuit, etc.).
"Always on": the screensaver remains switched on even in the event of
an alarm.
Note: active messages that have to be acknowledged always deactivate
the screensaver.
Please select the keyboard layout.
Picklist: Germany, Switzerland, France, USA, USA International, UK,
Italy
Setup - System, submenu "Bar code reader"
Please select the character set.
Picklist: Germany, Switzerland, France, USA, USA International, UK,
Italy
The unit can save texts read in using the bar code reader in the event log.
Picklist: yes, no
Note: Texts are NOT saved in the following situations:
• An order sequence was read in ("Batch" option)
• The dialog for entering batch information is active ("Batch" option)
• The dialog for testing the bar code reader is active
• The "Save text" function is already being executed
Advanced Graphic Data Manager
Direct access
code
13000/000
13005/000
13010/000
13020/000
13025/000
10900/000
10950/000
10955/000
Advertisement
Table of Contents
