Table of Contents
Advertisement
Commissioning and use during operation
"Printout" menu items
Device settings
User administration
Submenu "Event log/audit trail"
94
6.5.9
Extras – Store text
Save the text comments ("subsequent reporting") for a specific time. After entering the desired date
and time, a predefined text can be selected or a new text can be entered (see "Setup –> Application
–> Text). These texts are stored in the event log/audit trail.
When user administration is activated ("Setup –> System –> Security –> Protected by:
"FDA 21 CFR Part 11"), this function is only available if a user is logged on and this user
has the necessary rights.
6.5.10
Extras - Printout
If a printer is connected to the device, device settings, events and measured values can be printed
out here.
Fig. 71:
Extras "Printout"
For printing out device settings (incl. date/time).
All the user administration data are printed out.
Note: Passwords are not visible. When user administration is activated ("Setup –> System –> Security –> Protected by:
"FDA 21 CFR Part 11"), this function is only available if a user is logged on and this user has the necessary rights.
Print out event log/audit trail.
Search filter
From
From
To
To
Print
Description
(factory settings are highlighted in bold)
For a better overview a search can be conducted looking for specific events (e.g. only
setup changes).
Picklist: all events, alarm limit violation, on/off events, setup change, power on/off,
service, external memory, user administration, acknowledging messages,
miscellaneous
Enter the time as of which the events should be printed out.
Entry: date
Enter the time as of which the events should be printed out.
Entry: time
Enter the time up to which the events should be printed out.
Entry: date
Enter the time up to which the events should be printed out.
Entry: time
Start printing.
Advanced Graphic Data Manager
Advertisement
Table of Contents
