Table of Contents
Advertisement
Advanced Graphic Data Manager
"Application"
menu items
Bar graph
Submenu: Circular chart
Submenu: Texts
Settings only required if you want to save text for subsequent reporting. Here, specify the text that can be saved
in the event log during operation. Up to 30 different texts with a maximum of 22 characters each can be
entered.
Text 1 - 30
Submenu: Softkeys
You can specify the function assigned to softkeys 1 to 3 of the unit.
Fig. 48:
Softkey 1
Softkey 2
Softkey 3
Configurable parameters
(factory settings are highlighted in bold)
Specify the direction in which the bar graphs should be drawn.
Picklist: vertical (bottom->top), vertical (top->bottom), horiz. (left-
>right), horiz. (right->left), centered/vertical, centered/horiz.
Setting for the circular chart.
1 revolution =
Specify how long it takes for the circular chart to be completely written
to once (one complete revolution).
Note: the unit always only shows 1/4 of the chart.
Picklist: 1 hour to 8 hours, 1 day to 7 days
Create or change the text here.
Setup Application, Softkeys submenu
Specify what function should be assigned to this softkey.
Picklist:
– Not assigned
– Safe SD card removal
– Event log/audit trail (factory setting Softkey 1)
– Historic measured values (factory setting Softkey 2)
– Log onto device (Login) (only if "FDA 21 CFR Part 11" is active)
– Log out from device (Logout) (only if "FDA 21 CFR Part 11" is active)
– Next display method
– Screenshot
– Search in trace (factory setting Softkey 3)
– Remove USB stick safely
– Show analyses
– Change set point (only if "Change set points: Also in menu Extras" is
active)
Commissioning and use during operation
38220/000 to
38220/009
38500/000 to
38500/009
61001/000 to
61030/000
62000/000
62005/000
62010/000
Direct
access
code
79
Advertisement
Table of Contents
