Making Copies With Margins (Margin) - Canon Color imageRUNNER C3480 Manual

Making Copies with Margins (Margin)

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Margin Mode," on p. 4-38.
IMPORTANT
When the Margin mode is set, the entire original image is shifted to the left, right, top, or
bottom by a selected width, then copied. When copying an original image that extends to
the edge of the sheet, part of that image will be cut off.
1
7
2
7-60
Book/Page Edit/Shift Settings
Press [Book/Page Edit/Shift] ➞ [Margin].
Select the desired margin type ➞ set the margin width.
Press [-] or [+] to set the margin width (-1 15/16" to +1 15/16" (-50 mm to +50
mm)) of the front and back side of the paper.
IMPORTANT
•
If you are using the Margin and 2-Sided modes together and copying an original
that already has margins, follow the instructions below:
- 1 2-Sided: Set the margin for the back only.
- 2 2-Sided: You do not need to set a margin. Proceed to make copies in the usual
way.
- 2 1-Sided: Set the margin for the back only.
•
If you are using the Margin and 2-Sided modes together and copying an original
that does not have a margin, follow the instructions below:
- 1 2-Sided: Set the margin for both the front and back.
- 2 2-Sided: Set the margin for both the front and back.
- 2 1-Sided: Set the margin for both the front and back.