Enter the
2.
Internal IP Address
Ensure that the device with the Internal IP Address has been added to the
subscriber's table.
Enter the
3.
Internal Port
Enter a valid
4.
Enter the
5.
External IP Address
The External IP address field will default to the IP address of the Access
Gateway.
Enter the
6.
External Port
Optional: Enter the
7.
to the internal device from any network-side workstation.
Optional: Enable the
8.
this will only allow address in the source-based access control list to connect on this port
mapping. Source-based access control needs to be enabled for this to be in effect.
9.
Optional: Enter the
connect to the device from any TCP/UDP port of a network-side workstation.
Select the protocol (
10.
Click on the
11.
values to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on page
"Deleting Static Ports {Static Port-Mapping Delete}" on page
Deleting Static Ports {Static Port-Mapping Delete}
Static Port-Mapping allows the network administrator to setup a port mapping scheme that
forwards packets received on a specific port to a particular static IP (typically private and mis-
configured) and port number on the subscriber side of the Access Gateway. The advantage for
the network administrator is that free private IP addresses can be used to manage devices (such
as Access Points) on the subscriber side of the Access Gateway without setting them up with
public IP addresses.
This procedure shows you how to add static ports.
284
.
reference.
.
MAC Address
.
reference.
Remote IP Address
Protect with Source IP-based Access Control
Remote Port
or
) from the pull-down menu.
TCP
UDP
button to add this static port, or click on the
Add
. Leave this field set to zero if you want to connect
reference. Leave this field set to zero if you want to
A
G
CCESS
ATEWAY
option. Enabling
button to reset all
Reset
200.
284.
System Administration
Need help?
Do you have a question about the Access gateway and is the answer not in the manual?
Questions and answers