Deleting Static Ports {Static Port-Mapping Delete - Nomadix HotSpot Gateway HSG User Manual

H S G ™
OT POT ATEWAY

Deleting Static Ports {Static Port-Mapping Delete}

Static Port-Mapping allows the network administrator to setup a port mapping
scheme that forwards packets received on a specific port to a particular static IP
(typically private and mis-configured) and port number on the subscriber side of the
HSG. The advantage for the network administrator is that free private IP addresses
can be used to manage devices (such as Access Points) on the subscriber side of the
HSG without setting them up with public IP addresses.
This procedure shows you how to add static ports.
From the Web Management Interface, click on
1.
Mapping Delete.
The Delete Static Port-Mapping Entries screen appears:
Enter the
2. External IP Address
delete.
Click on the
3. Delete
reset your changes to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on
page 125.
"Adding Static Ports {Static Port-Mapping Add}" on page
System Administration
and/or the
External Port
button to delete the static port, or click on the
, then
System Static Port-
of the item you want to
Reset
197.
button to
199