Establishing Session Rate Limiting {Session Limit - Nomadix Access gateway User Manual

Enter the
2. Destination IP/Prefix Length
table. This is the Destination IP or Subnet that the Route is trying to reach, with the prefix
length to determine how large the subnet might be.
Enter the
3. Gateway IP
use to try to reach the destination IP/Subnet.
Choose the
4.
Choose the
5.
Choose the
6.
Click on the
7.
if you want to reset all the values to their previous state.
Deleting a Route
To deleted a route, click the
To restore a deleted route, reboot the NSE (which will restore auto-generated
routes) or manually re-enter the route.

Establishing Session Rate Limiting {Session Limit}

Session Rate Limiting (SRL) significantly reduces the risk of "Denial of Service" attacks by
allowing administrators to limit the number of DAT sessions any one user can take over a given
time period and, if necessary, then block malicious users.
From the Web Management Interface, click on
1.
Rate Limiting screen appears:
Click on the check box for
2.
required.
3. Enter values for the following session "limiting" parameters:
282
address for the Route being added so that the NSE knows what to
, the physical NSE Port to which the route is attached.
Port Name
based on what the route is designed for. This will normally be
Role
, or
Type Static Persistent
button to add this route to the routing table, or click on the
Add
link in the routing table. The route is immediately deleted.
Delete
Session Rate Limiting
address of the route you want to add to the routing
.
, then
System
to enable (or disable) this feature, as
A G
CCESS ATEWAY
wan
Reset
The Session
Session Limit.
System Administration
.
button