Viewing The History Log {History - Nomadix Access gateway User Manual

A G
CCESS ATEWAY
1. From the Web Management Interface, click on
screen appears:
Enable or disable the
2.
If you enabled Fail Over, define the
3.
Enter an IP address in the
4.
Define the port in the
5.
6. Select the Secondary To Primary Fail Over Time
Secondary will wait while not receiving messages from the Primary before it takes over.
Click on the check box for
7.
If you are using RADIUS, it is recommended to add both Nomadix gateways to the
RADIUS server.
Click on the
8.
values to their previous state.

Viewing the History Log {History}

You can view a history log of the system's Access, Reboot, and Uptime activities. The history
log contains up to 500 entries. Over 500 entries and each new log item removes the oldest
entry in the list. The latest entry is always at the top of the list.
System Administration
feature, as required.
Fail Over
Sibling IP Address
Fail Over Port
Reboot after changes are saved?
button to save your changes, or click on the
Submit
System , then
(Primary or Secondary).
Sibling Status
field.
field.
. The time set here is how long the
Fail Over. The Fail Over
button to reset all
Reset
271