Zone Migration - Nomadix Access gateway User Manual

From the Web Management Interface, click on
1.
The User Agent Filtering Settings screen appears:
Enable
2. User-Agent Filtering
Add the names of the different User-Agents that you want to filter to the
3.
Agent name

Zone Migration

Zone migration is an expansion of the NSE's "re-login after migration" capability, which
currently allows the system to force a subscriber to log in again if the subscriber moves from
one port location to another. Zone migration significantly expands this capability via the
following means:
It allows the creation of multiple zones, which are then constituted by groupings of

multiple port locations. These groupings can be made up of any combination of
desired ports (port values do not have to be sequential in order to be grouped within a
given zone).
The re-login requirement can then be configured so that subscribers can move from

one port to another within a zone without being required to re-login. However, when
moving between ports in different zones, the re-login requirement is enforced.
It is also possible to configure a zone so that migration between ports within the zone

requires the user to re-login.
In addition, the re-login after migration function was previously limited to RADIUS

and PMS users. This capability has now been extended to other subscriber login types.
186
to use the filtering capabilities for the User-Agents.
field. Windows Update and Apple iTunes are default filtered Agents.
, then
Configuration
A G
CCESS ATEWAY
User Agent Filtering.
HTTP User-
System Administration