Nomadix Access gateway User Manual page 108

VSA Value: Either WAN, Eth1, Eth2, Eth3, Eth4, or Eth5 to identify what interface

the user will try to send traffic on. (The interface will internally select properly on the
5600 and 2400).
1. From the Web Management Interface, click on
The Autoconfiguration Settings screen appears:
Enable or disable
2.
If you enabled Autoconfiguration, you must enter the following information into the
3.
corresponding fields:
RADIUS Authentication Name

RADIUS Password

Confirm Password

Click on the check box for
4.
you submit your changes.
Click on the
5.
data to its previous state.
See Enabling Auto
96
Autoconfiguration
Reboot after changes are saved?
button to save your changes, or click or the
Submit
Configuration.
Configuration
, as required.
A G
CCESS ATEWAY
, then Auto Configuration.
to reboot the system when
button to reset all
Reset
System Administration