Making Menu Selections And Inputting Data With The Cli; Menu Organization (Web Management Interface) - Nomadix Access gateway User Manual

Although the basic functional elements are the same, the CLI and the WMI have
some minor content and organizational differences. For example, in the WMI the
"subscribers" menu is divided into "Subscriber Administration" and
"Subscriber Interface." See also,
Interface)" on page

Making Menu Selections and Inputting Data with the CLI

The CLI is character-based. It recognizes the fewest unique characters it needs to correctly
identify an entry. For example, in the Access Gateway Menu you need only enter
Configuration menu, but you must enter
the System menu (because they both start with the letter "s").
You may also do any of the following:
Enter
 b
Press
 Esc
Press
 Enter
Press
?

When using the CLI, if a procedure asks you to "enter sn," this means you must type
press the
Enter

Menu Organization (Web Management Interface)

When you have successfully installed and configured the Access Gateway from the CLI, you
can then access the Access Gateway from its embedded Web Management Interface (WMI).
The WMI is easier to use (point and click) and includes some items not found in the CLI. You
can use either interface, depending on your preference.
For a complete description of all features available in the WMI, see
Management Interface (WMI)" on page
The following "composite" screen shows how the Access Gateway's WMI menus (folders) are
organized (shown here side-by-side for clarity and space). See also,
License" on page
54
54.
(back) or press
Esc
to abort an action at any time.
to redisplay the current menu.
at any time to access the CLI's Help screen.
key. The system does not accept data or commands until you hit the Enter key.
82.
"Menu Organization (Web Management
to access the Subscribers menu and
su
(escape) to return to a previous menu.
80.
A G
CCESS
to access the
c
to access
sy
"Using the Web
"About Your Product
Installing the Access Gateway
ATEWAY
and
sn