Table of Contents
Advertisement
In the
4.
Description
"Provide DHCP Service" is selected by default. De-select this option if you wish to disable
5.
subscriber-side DHCP for this port location. See
{DHCP}" on page
Enter a
6.
Subnet
You must now assign a State for this port-location. Possible states are, No Charge for using
this port-location, Charge for Use, and Blocked. If you do not assign a conditional state,
the state is registered as "No Charge" by default.
If applicable, select the
7.
Select the conditional state you want to assign to this port-location.
8.
If you choose
Note. Port-based Policies should be enabled from the Configuration->AAA page for
these settings to take effect.
Choose
port.
Choose
this port.
Choose
this port.
Choose
enabled on this port
You can select any number of billing methods per port.
A specific billing plan can be assigned to a port or all the existing billing plans defined on
the NSE can be enabled on the port. Please select the appropriate option from the
dropdown list for
Please note that while it is possible to set the value of a per-port configuration parameter
independently of the value of the corresponding global parameter, the feature itself is
disabled for a port unless both the per-port and global parameters are set to enabled. Thus:
RADIUS authentication for a port is enabled only if the RADIUS Client is globally
enabled AND the per-port enable RADIUS billing parameter is set.
Credit card billing for a port is enabled only if Credit Card Services is globally
enabled AND the per-port enable Credit Card billing parameter is set.
PMS billing for a port is enabled only if PMS Services is globally enabled AND the
per-port enable PMS billing parameter is set.
Tunneling for a port is enabled only if Tunneling is globally enabled AND the per-
port enable Tunneling parameter is set.
206
field, enter a meaningful description for this port-location assignment.
112.
for the port assignment you are adding.
Default QoS Policy
Charge for Use
Enable RADIUS Billing
Enable Tunneling
if you want L2TP Tunneling based billing to be enabled on
Billing if you want PMS based room billing to be enabled on
Enable PMS
Enable Credit Card
Billing Plan(s) available on port
"Managing the DHCP service options
for the port assignment you are adding.
additional configurations are available. Refer to the
if you want RADIUS billing to be enabled on this
Billing if you want Credit Card based billing to be
.
A
G
CCESS
ATEWAY
System Administration
Advertisement
Table of Contents
