Table of Contents
Advertisement
A
G
CCESS
ATEWAY
12.
Define the messages you want to present to subscribers, including:
Introduction Message
Offer Message
Policy Message
Define the
13.
available to subscribers.
If you want to allow free access to subscribers, you can define the following free billing
14.
options:
Default Free Access Time (in days)
Maximum Subscriber Lifetime (in days)
Define any Promotional Code Options in the
15.
fields, as required. You can define up to 5 Promotional Code Options.
The "Percentage Discount" parameter must be between 1 and 100.
16.
Click on the
to reset all the values to their previous state.
Setting Up an X over Y Billing Plan
1.
If required, click on the
2.
Define a "label" for this billing plan in the
Each plan must have a unique label, different from other plans.
Enter a description for this billing plan in the
3.
Enter the cost the plan in the
4.
Enter a duration value for this plan in the
5.
6.
Define the "time unit" for the duration value you entered in Step 5. The time unit can be
defined as either
Enter plan validity value for this plan in the
7.
Define the "time unit" for the plan validity value you entered in Step 7. The time unit can
8.
be defined as either
Define the
9.
plan.
System Administration
(Minute, Hour, Day, Week, or Month) you want to make
Units of Access
Submit
button to save your changes, or click on the
Enable
Plan Cost
,
, or
Minute
Hour
,
Day
Week
(to network) and
Up
Code Definition
check box to enable (make active) this billing plan.
Label
field.
Description of Service
field.
Plan Duration (X)
.
Day
Plan Validity
, or
.
Month
(to subscribers) bandwidth range for this billing
Down
and
Percentage Discount
Reset
button if you want
field.
field.
(Y) field.
237
Advertisement
Table of Contents
