Table of Contents
Advertisement
Adding a New IPSec Security Policy
In the
1.
IPSec Security Policies
Tunnel Security Policy Settings screen opens.
Select the tunnel peer IP address for which you would like to add a security policy from
2.
the
Tunnel peer IP address
; if the policy is a
AH
In the
3.
Traffic Selectors
methods:
Select a specific protocol from the
Enter a specific protocol number in the
at www.iana.org/assignments/protocol-numbers.
128
table, click the
menu. You must select a peer if the policy is using
or
Discard
Bypass
section, define a specific protocol by one of the following
Protocol
button to add an entry. The IPsec
Add
policy, select
.
none
menu.
field. Protocol numbers are available
Protocol
A
G
CCESS
ATEWAY
ESP
or
System Administration
Advertisement
Table of Contents
