Table of Contents
Advertisement
A
G
CCESS
ATEWAY
5.
Select whether
authentication to override MAC authentication if necessary, and use the credentials of the
last login to succeed.
See
Miscellaneous
Miscellaneous Options
In the "Miscellaneous Options" category, Enter a value for the time (in seconds) in the
1.
Default User Idle Timeout
before the subscriber's session times out and they must login again.
2.
The Access Gateway can reauthenticate "repeat" subscribers who return to the system
within 720 hours. To enable this feature, click on the check box for
Subscriber Reauthentication
If you want to enable the URL redirection feature, click on the check box for
3.
Redirection
For a Network Access Server (NAS), if you want to send a NAS identifier with your
4.
account access request, click on the check box for
NAS identifier in the
5.
To send the NAS IP address with your account request, click on the check box for
.
NAS IP
To send a NAS port type with your account request, click on the check box for
6.
Port type, then
To send the Framed IP address with your account request, click on the check box for
7.
Framed IP
.
8.
To enable Radius termination action enhancement, click on the check box for
Termination Action Radius Attribute
maximum data volume threshold for which term-action will be enforced (volume-based
sessions only).
This option provides support for Radius Termination-Action for time- and volume-based
subscribers working in conjunction with an external Radius server. Enforcement of this
attribute will result in either:
logout of the subscriber
re-authentication of the subscriber through issuance of a new Radius Access-Request
that contains a new Acct-Session ID.
The Radius re-authentication that occurs due to term-action enforcement will be
transparent to the subscriber. This is true for time based sessions that expire, as well.
Radius accounting augmentation will take place as a result of a successful re-
authentication.
System Administration
Later Login Supersedes Previous
Options.
field. This value determines how much "idle" time elapses
.
.
NAS identifier
define the NAS port in the
. This will allow a secondary form of
Send NAS identifier
field.
NAS Port Type
, then select the percentage (100% - 75%) of the
Enable Automatic
Enable URL
, then define the
field.
Enable
Send
Send NAS
Send
161
Advertisement
Table of Contents
