Table of Contents
Advertisement
Enter a description for this billing plan in the
3.
Define the
4.
week, and per month).
Define the
5.
One time unit is assigned to each billing plan.
The Access Gateway allows you to define multiple billing plans with different time
units at the same time. For example, you can define one billing plan that changes
by the hour (e.g. $2.95 per hour) and a second plan that charges per day (e.g.
$12.95 per day).
Define the
6.
plan.
Define the DHCP Pool (public or private) -- see following note.
7.
The "public" option requires IP Upsell to be turned on, otherwise subscribers
will receive private IP addresses.
8.
If using Class-Based Queuing, enter the primary and subclass for this subscriber in the
field. Enter these values in the format: <top-level class>.<subclass>
Class
(top-level class and subclass separated by a period). See
page 11
and
Click on the
9.
Alternatively, you can click on the
or click on the
Click on the
10.
(previous) screen.
Repeat Steps 2 through 11 for each billing plan. You can enable (make active) any or all of
11.
the available billing plans.
236
schemes for this billing plan (rate per minute, per hour, per day, per
Pricing
of the billable event (either Minute, Hour, Day, Week, or Month).
Time Unit
(to network) and
Up
"Class-Based Queueing" on page
button to save your changes and establish this billing plan.
Submit this Plan
button if you want to reset all the values to their previous state.
Reset
button at any time to return to the Internal Billing Options Setup
Back
Description of Service
(to subscribers) bandwidth range for this billing
Down
105.
Delete this Plan
A
CCESS
field.
"Class-Based Queueing" on
button if you want to delete this plan,
System Administration
G
ATEWAY
Advertisement
Table of Contents
