Updating The Access Gateway Firmware {Upgrade - Nomadix Access gateway User Manual

From the Web Management Interface, click on
1.
Subscriber Interfaces screen appears:
2. Enable or disable your choice of Block Wired Subscriber Interfaces.
3. Click on the
values to their previous state.

Updating the Access Gateway Firmware {Upgrade}

Upgrading the Access Gateway firmware is performed from the Access Gateway's Command
Line Interface (CLI) only. Refer to the Firmware Upgrade Procedure (separate document
available from Nomadix Technical Support).
286
Submit button to save your changes, or click on the
, then
System Subscriber Interfaces.
Reset
System Administration
A G
CCESS ATEWAY
The
button to reset all